Table of Contents
Advertisement
Port No: The port ID. It cannot be changed. Aggregations mean any
configured trunk group.
Root Path Cost: This parameter is used by the STP to determine the best
path between devices. Therefore, lower values should be assigned to ports
attached to faster media, and higher values assigned to ports with slower
media. Set the RSTP path cost on the port. Number between 0 - 200000000.
0 means auto generated path cost.
State: Show the current port state includes designated port, root port or
blocked port.
Status: Show the current port status includes forwarding, disable etc...
Loopback Detection Settings
Figure 6-2
27
Advertisement
Table of Contents
