Edimax ES-5808P User Manual page 16

 Current Status: Displays current port status.
 Setting Status: Displays current status.
Click Update to make the configuration effective.
Port Mirroring
The Port mirroring is a method for monitoring traffic in switched networks. That
Traffic through ports can be monitored by any of the ports means traffic goes in
or out monitored (source) ports will be duplicated into mirroring (destination)
port.
 Destination (mirroring) port for monitoring Rx only, Tx only or both RX and
TX traffic which come from the source port. Users can connect the mirroring
port to LAN analyzer or Netxray.
 Monitored Packets: Pull down the selection menu to choose what kind of
packet is to be monitored.
 Source Port: The ports that the user wants to monitor. All monitored port
traffic will be copied to mirroring (destination) port. Users can select multiple
source ports by ticking the check boxes beneath the port number label to be
monitored.
And then, click Update to have the configuration take effect.
Bandwidth Control
This page allows the setting of the bandwidth for each port. The TX rate and
Rx rate can be filled with the number ranging from 1 to 255. This number
should be multiplied by the selected bandwidth resolution to get the actual
bandwidth.
Figure 2-2
14