Edimax ES-5808PHG Specifications

The Edimax ES‐5808PHG is an 8‐port gigabit rack‐mount switch
connections in medium to large network environments. Its stan
with the most widely used mounting systems on the market. Th
network environment's performance and efficiency.
Complies with the IEEE 802.3at Power over Ethernet (PoE+) Sta
The ES‐5808PHG features 8 IEEE 802.3at Power over Ethernet (P
port. It can convert standard 90‐260V AC electricity into low‐vol port It can convert standard 90 260V AC electricity into low vol
network accessories via existing LAN cables. With PoE detection
connected device is IEEE 802.3af compliant. In the event that a
transmitted through the LAN cable. The ES‐5808PHG can be use
cameras, or VoIP devices. It is the best solution for network env
Compliant with Cat 5 Ethernet Cables for Higher Cost Efficiency
The ES‐5808PHG can transmit both power and network data via
networking cables or power adapters are necessary for PoE app t ki bl
cost of establishing a sturdy network environment.
Features Power Budget UI for Easy Management of PoE Device
The ES‐5808PHG features an innovative power budget UI that a
PoE port as well as the total power consumption of those device
monitor the whole PoE network and assess the total power usag
architecture. The power budget UI also features a remote on/of
IT manager does not need to unplug and plug the network line m
manager can reset the PoE device remotely in seconds.
Smart Tools for Improved Network Efficiency
The ES‐5808PHG features smart QoS/CoS and network monitor
security and management features include bandwidth control a
Through its web‐based interface, an administrator can set up VL
QoS, and configure link aggregation settings to create fat traffic g gg g
Spanning Tree to detect and break unintentional cabling loops w
on the network edge. Best of all, the password‐protected config
Gigab
d t f P E
g
it 8‐Port PoE+ Web Smart Switch
with 8 PSE/PoE ports. It is designed for sturdy network
dard 19‐inch rack‐mount brackets allow for perfect integration
he Edimax ES‐5808PHG is truly a superb choice to boost your
andard
PoE+) ports, which supplies up to 30 watts of electricity per
ltage DC electricity to power IEEE 802 3at/af compliant ltage DC electricity to power IEEE 802.3at/af compliant
n capability, the ES‐5808PHG is able to verify whether the
PoE device is not detected, only network data will be
ed with different PoE products, such as access points, network
vironments where power outlets are difficult to access.
y
a Cat 5 Ethernet cables. With the ES‐5808PHG, no special
plications. The ES‐5808PHG reduces the difficulty, time, and li ti Th ES 5808PHG
es
llows IT managers to monitor the power consumption on each
es connected to the ES‐5808PHG. IT managers can easily
ge before adding new PoE devices to the PoE network
ff function for each PoE port. When one PoE device hangs, the
manually. Simply by clicking the power on/off button, the IT
ing tools that allow for improved network efficiency. Its
and VLAN (IEEE 802.1Q VLAN tagging and port‐based VLAN).
LANs to segregate traffic, prioritize mission‐critical data with
pipelines. In addition, the ES‐5808PHG also supports Rapid p p
within the network. All of these features offer extra protection
guration interface can be accessed remotely.
ES-5808PHG
d th diffi lt ti
pp
d
p