Spanning Tree - Edimax ES-5808P User Manual

8 ports 10m/100m desktop poe web smart fast ethernet switch

Hide thumbs Also See for ES-5808P:

Table of Contents

Spanning Tree

STP Bridge Settings

 Bridge Priority: This parameter configures the spanning tree priority globally

for this switch. The device with the highest priority becomes the STP root

device. However, if all devices have the same priority, the device with the

lowest MAC address will then become the root device. Number between 0 -

61440 in increments of 4096. Therefore, there are 16 distinct values.

 Hello Time: Interval (in seconds) at which the root device transmits a

configuration message (BPDU frame). Number between 1-10 (default is 2).

 Max Age – The maximum time (in seconds) a device can wait without

receiving a configuration message before attempting to reconfigure. That

also means the maximum life time for a BPDU frame. Number between 6-40

(default is 20).



Forward Delay: The maximum time (in seconds) the root device will wait

before changing states (i.e., discarding to learning to forwarding). Number

between 4 – 30 (default is 15)

STP Port Settings

Figure 6-1

Table of Contents