Sony CLIE PEG-TH55 Handbook page 106

Setting the Network preferences for a wireless LAN
C WEP :
If "*" is displayed for [WEP] in the ScanResult screen, a WEP key
(encryption) option and the WEP key code are required.
Tap V to select a WEP key (encryption) option, and enter the WEP key
code when the WEP KEY Input dialog box is displayed.
D ConnectMode
[Infrastructure]: Select this when connecting to the Internet via a wireless
[Adhoc]:
E AutoConnect :
When multiple profiles are registered on your CLIÉ handheld, an
appropriate profile for your location is automatically selected to connect
to a wireless LAN access point. If you select [Enable], the profile will be
one of the targets when the auto connect is performed. When you selected
[Enable], the profile name with " * " is displayed in the Wireless LAN
Setup screen for profile list.
F Advanced Setup
You can change the following settings by tapping [Advanced Setup].
Tap [OK] to return to the Wireless LAN Setup screen.
When you disable DHCP and configure the following
settings manually
You do not need to disable DHCP for normal use. If you want to disable
DHCP, ask the administrator of the wireless LAN network.
• IP Address
• Subnet Mask
• Gateway Address
• Primary DNS
• Secondary DNS
Customizing your CLIÉ™ handheld (Preferences)
LAN access point.
Select this for normal use.
Select this when directly connecting to a wireless LAN
compatible device.
Tap to select [Adhoc] and select a channel from the
displayed list by tapping V next to [ch:].
Continued on next page
• • • • • • • • • • • • • • • • • • •
106