Sony CLIE PEG-NX73V Handbook page 109

Performing the IR HotSync
Performing the IR HotSync
You can perform the IR HotSync
computer settings, CLIÉ handheld settings, and Conduit Setup.
1
Rotate the Jog Dial™ navigator to select the HotSync icon
on the Application Launcher screen and press the Jog Dial™
navigator.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
2
Tap Local.
3
Tap the arrow V and select IR to a PC/Handheld.
4
Point the IR port of your CLIÉ handheld directly to the IR port
of the computer.
For best results, your computer and your CLIÉ handheld should be 4 to 8
inches (approximately 10 to 20 centimeters) apart, and the path between
your CLIÉ handheld and the computer must be clear of obstacles.
5
Tap the HotSync
The HotSync
A message will be displayed when the HotSync
To restore the local HotSync settings
When performing the local HotSync
restore the local HotSync settings.
1
Connect the cradle to your computer.
2
Click the HotSync
bottom right of the taskbar) and select Local USB from the
shortcut menu.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
operation
®
®
operation when you have prepared your
icon.
®
operation starts.
®
icon in the Windows task tray (at the
®
operations)
operation
®
operation is complete.
operation with the cradle, you need to
®
109