Sony CLIE PEG-NX73V Handbook page 112

Performing the HotSync
(for Bluetooth™ built-in models only)
Tips
• The step in which the Passkey Input screen appears varies depending on the mobile
phone, and for some devices, the Passkey input screen does not appear. In any case,
follow the instructions shown on the screen and enter a Passkey when required.
• Depending on the radio wave conditions, it may take time to complete a Bluetooth™
compatible device discovery or establish communication.
• If it takes too long to perform a device discovery, tap Cancel on the discovery screen,
and conduct a discovery again.
• If the device discovery failed in detecting a device, conduct a discovery again.
Performing the HotSync
Bluetooth™ function
1
Enable the Bluetooth™ function on your computer.
2
Check that the HotSync
Windows task tray (at the bottom right of the taskbar) on your
computer.
Tip
If the HotSync
select Programs (for Windows XP, select All Programs), Sony Handheld,
and click HotSync Manager to start the HotSync manager.
3
Rotate the Jog Dial™ navigator to select the HotSync icon
on the Application Launcher screen and press the Jog Dial™
navigator.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
4
Check that Local is selected.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
operation using the Bluetooth™ function
®
operation using the
icon is not displayed in the Windows task tray, click Start,
®
operations)
icon is displayed in the
Continued on next page
• • • • • • • • • • • • • • • • • • •
®
112