Table of Contents
Advertisement
User Manual
/
CBA850
DEVICE OPTIONS
Reboot Options
•
Reboot the Device: Manually restart the router.
•
Factory Reset Router: Reset the router to its original
settings. Once reset your SSID and admin password
will match the sticker on the bottom of the router.
•
Device Console: Access router's command line
interface (CLI) console.
Scheduled Reboot
•
Scheduled Reboot: Router will restart at user-
specified time.
•
Enable Watchdog Reboot: Router will restart when
it determines an unrecoverable error condition has
occurred.
DIAGNOSTICS
Ping Test
A simple test to check Internet connectivity. Type the
Hostname or IP address of the computer you want to ping
and click the 'Ping' button.
Speed Test
•
Tests Against Cradlepoint Server - Up to ten speed
tests are permitted against a Cradlepoint server.
•
WAN Device - The WAN Device that is selected will
have the test run on it. If no device is selected then
the highest priority connected device will be used.
•
Custom Server - Type the Hostname or IP address of
the server to which you wish to perform a test. If left
empty the test will be done to a Cradlepoint server.
•
Custom Port (Optional) - The port to which the test is
directed.
•
Max Duration - The Max Duration is the Maximum
amount of time for which the test should be run. The
test may finish sooner if sufficient data is collected.
•
Data Limit - The Data Limit is the limit of how
much data will be transferred while measuring the
connection speed; this should be limited to reduce the expense of a speed test. Setting the limit to 0 will
cause the test to run until enough data is collected or the duration limit is met.
•
Test Type - Select the type of test you would like to run. TCP Upload will test speed going to the server, TCP
Download will test speed coming to the client, and UDP will measure the speed going to the server.
©2016 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
8/25/16
54
Advertisement
Table of Contents
