Braun LS 5500 Instructions Manual page 11

• The shaver foil and the cutter block
are precision parts that wear out with
time. To maintain optimum shaving
performance, replace your foil and
cutter block when you notice a reduced
shaving performance.
• Do not shave with a damaged foil or
cord.
• How to replace the shaving parts
Shaver foil: Press the release buttons
to remove the shaver head. To
4
remove the shaver foil, press the blue
plastic frame (F). To mount a new one,
insert it from inside the shaver head.
Cutter block: To remove the cutter
block, press and turn it 90° (G1), then
take it off. To put on a new cutter block,
press it onto the cutter block holder and
turn 90° (G2).
Preserving the rechargeable batteries
In order to maintain the optimum capacity
of the rechargeable batteries, the shaver
has to be fully discharged (by shaving)
approximately every 6 months. Then
recharge the shaver to full capacity. Do
not expose the shaver to temperatures
higher than 50 °C for extended periods
of time.
Environmental notice
This product contains
rechargeable batteries. In the
interest of protecting the
environment, please do not
dispose of the product in the household
waste at the end of its useful life. Disposal
can take place at a Braun Service Centre
or at appropriate collection points
provided in your country.
Subject to change without notice.
This product conforms to the
European Directives EMC 89/336/
EEC and Low Voltage 73/23/EEC.
Electric specifications see printing on the
special cord set.
11