Mitel MIVOICE OFFICE 400 6940 SIP User Manual page 36

Phoning
Redial list:
Press the
can also press Call lists or Redial function key (if defined).
➔
List of most recent selected entries (including the presence status of the con-
tact) is displayed.
Scroll through the list and select the user you want.
Pick up the handset or press the
➔
The call number of the user is dialled.
Dialling with a configurable key/ busy lamp field
You want to call someone whose phone number is stored under a config-
urable key or a busy lamp field.
To find out how to configure a configurable key, refer to chapter "Configur-
ing keys", page 96.
Phoning with the handset:
1. Pick up the handset.
2. Press the desired configurable key/busy lamp field.
➔
The phone number is dialled.
Using your phone in handsfree mode:
Press the desired configurable key/busy lamp field.
➔
The phone number is dialled.
Dialling with the line key
You want to make a call via a line key.
You can make a call via a line key. Your phone is equipped with two dedi-
cated line keys (two top softkeys configured as line keys). Your system
administrator can set up to ten additional line keys (twelve in total). The
actual number of line keys depends on the system configuration.
Press a set line key directly or move your finger from the right to left in the
area to the right of the left softkeys and select the desired line key. The sta-
tus line at the top left will show the dialled line number (L1, L2 etc.). If a line
is free, the
Line keys are stored on configurable keys by your system administrator
(see chapter "Line key on a key telephone", page 72).
36
Menu softkey or press the function key for the Menu. Alternatively, you
New call softkey at the bottom left of the display can be used.
Dial softkey.
Mitel 6940 SIP
eud-1765/1.0 – R5.0 HF1 – 08.2017