Table of Contents
Advertisement
Datasheet
Caution
module components to come into contact with adjacent modules, causing damage to
the modules.
3.
Pull the captive screws to unseat the module and slowly slide the module along the guides.
4.
Replace the filler panel in the empty slot.
5.
Store the module in an antistatic protective bag.
1
Captive Screws (Use to remove modules.)
Create a Simulated Device
To run examples without the hardware installed, use an NI-DAQmx simulated device. To create
a simulated device in MAX:
1.
Launch MAX.
Right-click Devices and Interfaces»Create New.
2.
From the dialog, select Simulated NI-DAQmx Device or Modular Instrument.
3.
4.
Type
in the text box at the top of the window.
4300
5.
Select the device from the list provided.
Click OK.
6.
Amplicon.com
Sales:
+44 (0) 1273 570 220
Do not pull the front panel to remove the module. Doing so may cause
Figure 9. Removing NI PXIe-4300 Modules
1
2
IT and Instrumentation for industry
Website:
www.amplicon.com
2
Front Panel (Do not use to remove modules.)
Email:
sales@amplicon.com
Advertisement
Table of Contents
