Grandstream Networks GSC3516 User Manual page 56

Firmware Server Path
Firmware Server Username
Firmware Server Password
Firmware File Prefix
Firmware File Postfix
Upgrade
Upgrade and Provisioning/Config File
Download Device Configuration
Upload Device Configuration
Config Upgrade via
Config Server Path
Config Server Username
Config Server Password
Config File Prefix
Config File Postfix
Authenticate Conf File
XML Config File Password
Sets IP address or domain name of firmware server. The URL of the server that hosts the firmware
release. Default is "fm.grandstream.com/gs".
The username for the firmware server.
The password for the firmware server.
Checks if firmware file is with matching prefix before downloading it. This field enables user to store
different versions of firmware files in one directory on the firmware server.
Checks if firmware file is with matching postfix before downloading it. This field enables user to store
different versions of firmware files in one directory on the firmware server.
Upgrade Detection
Click the "Start" button to check whether the firmware in the firmware server has an updated version,
if so, update immediately.
Upgrade and Provisioning – Firmware page
Configure Manually
Click to download the device configuration file in .txt format.
Upload config file to the phone.
Configure via Network
Configures the config upgrade method as TFTP, HTTP, HTTPS, FTP or FTPS. Default is
HTTPS
Sets IP address or domain name of configuration server. The server hosts a copy of the
configuration file to be installed on the device. Default is "fm.grandstream.com/gs".
The username for the config server.
The password for the config server.
Checks if configuration files are with matching prefix before downloading them. This field
enables user to store different configuration files in one directory on the provisioning server.
Checks if configuration files are with matching postfix before downloading them. This field
enables user to store different configuration files in one directory on the provisioning server.
Sets the device to authenticate configuration file before applying it. When set to "Yes", the
configuration file must include value P1 with phone system's administration password. If it
is missed or does not match the password, the device will not apply it. Default setting is
"No".
Decrypts XML configuration file when encrypted. The password used for encrypting the
XML configuration file is using OpenSSL.
Upgrade and Provisioning – Config File page