Grandstream Networks GSC3516 User Manual page 43

Paging Priority Active
Priority
Listening Address
Label
Group Paging Address
IGMP Keep-alive Interval (s)
Emergency Group Paging
Volume
PTT
Priority Channel
Emergency Channel
Accept While Busy
Channel
Group Paging
Priority Group
Emergency Group
Accept While Busy
Determines if a new paging call whose priority is higher than the existing paging call will be
answered. The default is disabled. Check to enabled.
Multicast Listening
Configures the IP address and port number for monitoring multicast paging call. Reboot the device to
make changes take effect.
The valid IP address range is from 224.0.0.0 to 239.255.255.255.
Label for each listening address corresponding to priority.
PTT/Group Paging
General Settings
Allows to configure the group paging IP address.
Specifies how often the phone reports IGMP when Group Paging function is turned on. IGMP report
helps to keep Group Paging alive in sleep state.
Configures default volume for group paging when emergency channel/group is used.
PTT Config
Configures to enable or disable PTT. Default is "Disabled"
Set priority channel for PTT. PTT received on priority channel will take precedence over active PTT
on normal channel. Priorities go from 1 to 25.
Set emergency channel for PTT. Emergency channel has the highest priority. PTT using emergency
channel will take precedence over PTT on priority or normal channel. Please note PTT to emergency
channel will not be rejected even when device has enabled DND.
Configures whether to accept PTT while device is in active call. If set to "No", device will ignore
PTT while in active call. If set to "Yes", while in active PTT talk, device will accept PTT if it has the
same priority; If device is in active SIP call, device will accept PTT and put the SIP call on hold.
Default is "Disabled"
Configures PTT channel. Configures options for the channel such as transport, accept, join PTT and
its label. Only available and joined channel will be displayed in PTT channel list. If users need send
or receive PTT, "Transport" and "Accept" must be enabled for this channel.
Paging Config
Allows to enable or disable group paging.
Configures priority paging group. Paging received on priority group will take precedence overactive
paging on normal group.
Set emergency group for paging. Emergency group has the highest priority. Paging using emergency
group will take precedence over paging on priority or normal group.
Configures whether to accept paging while device is in active call. If set to "No", device will ignore
paging while in active call. If set to "Yes", while in active paging call, the device will accept other