Table of Contents
Advertisement
OPERATING INSTRUCTIONS
INSERTING REMOTE CONTROL BATTERIES
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.
Note: Pictures are only for reference.Actual items may differ.
CAUTION
• Only use the specified AAA batteries.
• Do not mix new and old batteries. This may result in creaking or leakage, which may pose a
risk of fire or lead to personal injury.
• Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may result
in leakage, which may pose a risk of fire or lead to personal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the batteries away from children or pets.
• When the remote control will not to be used for an extended period, remove the batteries.
OPERATING THE REMOTE CONTROL
1 .Aim Remote Control directly at the Remote Control Sensor on the right
down corner of the TV set.
2 .Remote Control range is at approx.16 feet with angles of approx.30 degree.
3. Avoid obstructions between the Remote Control and the sensor.
•If you do not intent to use the remote control for a long time, remove the
batteries.
•If the remote control does not operate correctly, or if the operating range
reduced,replace both batteries with new ones.
NOTES:
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a
•
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
Save the original shipping box and packing materials, as they will come in handy if you ever have
•
to ship your monitor.
For maximum protection, repackage your monitor as it was originally packed at the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
•
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
11
User's Manual
Advertisement
Table of Contents
