Related Manuals for Hyundai HASBT35
Summary of Contents for Hyundai HASBT35
- Page 1 PETROL BLOWER VACCUM SHREDDER HASBT35 WARNING: Read thoroughly the instruction manual before using.
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS........................3 2. YOUR PRODUCT........................... 7 3. ASSEMBLY............................. 8 4. FILLING THE FUEL TANK......................... 10 5. OPERATION............................11 6. MAINTENANCE............................12 7. DECLARATION OF CONFORMITY....................14 8. WARRANTY............................15 9. PRODUCT FAILURE........................... 16 10. WARRANTY EXCLUSIONS......................17... -
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS WARNING! Before using this tool, please read these instructions of safety and use. It will help you to use safely the machine and reduce the risk of electrical shocks and accidents. If you give this tool to another person, also give this manual. Use this tool as described in this manual. - Page 4 SAFE OPERATING PRACTICES FOR THE TOOL Training Read the instructions carefully. Be familiar with the controls and the correct use of the machine. Never allow children or people unfamiliar with these instructions to use the machine. Local regulations can restrict the age of the operator. ...
- Page 5 come to a complete stop a) whenever you leave the machine, b) Before clearing blockages or unclogging chute, c) Before checking, cleaning or working on the machine. Do not tilt the machine while the power source is running. Fuel Handling ...
- Page 6 loss of strength, color changes or skin condition. These symptoms usually appear on the fingers, hands or wrists. Risk increases at low temperatures Inhalation of particles of material blown/vacuumed Unattended projections Contact with foreign objects Contact with the tool in operation Hearing loss in the absence of correct hearing protection Symbols Read the instructions.
-
Page 7: Your Product
13. Bottle for fuel mixture 6. Vacuum tube 14. Screwdriver 7. Collector bag 15. Primer bulb 8. Housing of vacuum tube b. Technical data Model HASBT35 Engine displacement 33 cm Rated engine power 1.0 kW/7500 min¹ Max engine speed 9000 min¹ Idling speed 3000 ±300 min... -
Page 8: Assembly
-Racing: 101.64 dB(A) -Average: 101.64 dB(A) -Uncertainly K=3 dB(A) Blower noise, sound pressure level: -Idling: 73.6 dB(A) -Racing: 93.4 dB(A) -Average: 92.7 dB(A) -Uncertainly K=3 dB(A) Measured sound pressure level Vacuum noise, sound pressure level: -Idling: 73.5 dB(A) -Racing: 93.2 dB(A) -Average: 92.54 dB(A) -Uncertainly K=3 dB(A) Sound power level (according to 2000/14/EC):... - Page 9 2.1 Remove screw A from the housing, 2.2 Push the tube onto the housing. Turn to lock onto place. 2.3 install screw A on the corresponding position, and fix the tube on the housing. To remove the tubes, rotate the tubes to unlock them remove from the blower housing outlet. B.
-
Page 10: Filling The Fuel Tank
C. Assembly of the collect bag Remove the Upper blower tube and Lower blower tube from the blower. Unzip the vacuum bag and place the adaptor inside as shown. Push the bag adaptor onto the housing. Turn to lock onto place. Install screw A on the corresponding position Make sure the vacuum bag is zipped and closed before starting the unit. -
Page 11: Operation
Danger of fire and burn injuries Always use extreme care when handling fuel! Fuel is highly flammable. Never attempt to fuel the vacuum blower if the fuel system components are damaged or are leaking. Never attempt the refuel the engine while it is running or still warm, allow it to cool before fuelling. -
Page 12: Maintenance
6. The engine may start, or it may be required to pull on the recoil starter until the engine starts. 7. Allow the engine to run idle for around 10 seconds to let it warm up. To stop: 1. Release the throttle trigger and allow the engine to idle for a few moments. 2. - Page 13 Check if the machine has not suffered damage. If the machine is damaged, you will need to hire a qualified technician to inspect the machine and makes repairs. WARNING Use only original manufacture’s replacement parts, accessories and attachment. Failure to do so can cause possible injury, poor performance.
-
Page 14: Declaration Of Conformity
ZI, 32 rue Aristide Bergès – 31270 Cugnaux - France Tel: +33 (0)5.34.502.502 Fax: +33 (0)5.34.502.503 Declares that the machines: PETROL BLOWER VACCUM SHREDDER Model: HASBT35 Serial No.: 20230806833-20230807052 Have been designed in compliance with the following standards: EN 15503: 2009+A2 EN ISO14982: 2009 EN ISO 3744:1995 &... -
Page 15: Warranty
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 16: Product Failure
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 17: Warranty Exclusions
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...