Dell Optiflex 740 User Manual page 20

1 system battery 2 positive side of battery connector
4 battery socket tab
NOTICE: To avoid damage to the battery connector, you must firmly support the connector while replacing the battery.
6. Install the new system battery.
a. Support the battery connector by pressing down firmly on the positive side of the connector.
b. Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive side of the connector.
c. Press the battery straight down into the connector until it snaps into place.
7. If you have a Small Form Factor chassis, install the hard disk drive (see
8. Replace the computer cover (see
9. Enter system setup and restore the settings you recorded in
10. Properly dispose of the old battery as described in the Product Information Guide.
Back to Contents Page
3
Replacing the Computer Cover).
step 1
battery socket
Installing a Hard Drive).
(see Entering System Setup).