Table of Contents
Advertisement
CAUTION:
or removing a cable. The safety cap keeps the port clean and prevents accidental
exposure to laser light.
3. Insert the cable connector into the cable connector port on the faceplate.
4. Arrange the cable to prevent it from dislodging or developing stress points. Secure the cable so that it
is not supporting its own weight as it hangs to the floor. Place excess cable out of the way in a neatly
coiled loop.
CAUTION:
arc smaller than a few inches in diameter can damage the cable and cause problems
that are difficult to diagnose.
CAUTION:
allow the fastened loops of a cable to dangle, which stresses the cable at the
fastening point.
Do not leave a fiber-optic transceiver uncovered except when inserting
Avoid bending a fiber-optic cable beyond its minimum bend radius. An
Do not let fiber-optic cables hang free from the connector. Do not
14
Advertisement
Table of Contents
