Kodak IMAGELINK 2400DV Plus User Manual page 132

7-14
2. Initial Settings
System Settings
The print After a toner empty condition or toner
function at the cartridge life is detected, this function
time of Toner allows you to select either to stop printing
Empty or Toner or continue printing.
Cartridge Life
* Toner cartridge life detection is only
detection
(PR mode only)
Auto Film The Auto Format Select Print Function is
Format Select enable or disable through the control
print function panel.
(PR mode only)
90 degree Enables the prism to rotate the screen
rotation setting image 90 degrees.
Automatic paper Allows you to specify the paper source
source switching when Letter or A4 size paper is loaded in
(PR mode only) Lengthwise or Crosswise orientations into
the both paper feeding tray and paper
feeding cassette.
Auto switching: Printing continues by
automatically switching to the remaining
paper source after paper in the specified
paper source runs out.
Disabling Auto Switching: A paper empty
mode occurs and printing ceases after
paper in the specified paper source runs
out. The paper source must be refilled or
the paper source must be switched by
pressing the Output Selection Key in
order to resume printing.
* To change any of the system settings described above, contact the authorized dealer.
Description
connected with MSP3500.
(When selected the enable print after
the Toner Catridge life fulfillment,
while depress the Start key, LED dis-
plays the toner cartridge life fulfillment
"TE".)
Selection Initial Setting
Empty >> *
Disable
Print Life
>> Disable
Print
Empty >>
Enable
Print Life
>> Disable
Print
Empty >>
Enable
Print Life
>> Enable
Print
Enable * (200V)
Disable * (120V)
Enable
Disable *
Auto *
switching
Disabling
Auto
Switching