Tow/Haul Mode - Cadillac Escalade 2013 Owner's Manual

Tow/Haul Mode

The vehicle has a Tow/Haul Mode.
The Tow/Haul Mode adjusts the
transmission shift pattern to reduce
shift cycling, providing increased
performance, vehicle control, and
transmission cooling when driving
down steep hills and mountain
grades, towing, or hauling heavy
loads.
Press the button located on the end
of the shift lever to turn the tow/haul
on or off. When the tow/haul is on, a
light on the instrument panel cluster
will come on.
See Tow/Haul Mode Light on
page 5 20 and Hill and Mountain
Roads on page 9 12 for more
information.
Also see Tow/Haul Mode under
Towing Equipment on page 9 63 for
more information.
The Tow/Haul Mode works with the
®
Autoride feature, if the vehicle has
this, to enhance the ride when
trailering or with a loaded vehicle.
See Continuous Damping Control
(CDC) on page 9 40.
Tow/Haul Mode Grade Braking
(6-Speed Automatic
Transmission)
This feature is only enabled while
the Tow/Haul Mode is selected and
the vehicle is not in the Range
Selection Mode. See Tow/Haul
Mode listed previously and Manual
Mode on page 9 32. Tow/Haul Mode
Grade Braking assists in
maintaining desired vehicle speeds
when driving on downhill grades by
using the engine and transmission
to slow the vehicle.
Driving and Operating
To disable or enable Tow/Haul
Grade Braking within the current
ignition key cycle, press and hold
the Tow/Haul button for
three seconds. A DIC message will
be displayed. See Transmission
Messages on page 5 36.
See Towing Equipment on
page 9 63 for more information.
For other forms of grade braking,
see Automatic Transmission on
page 9 29 and Cruise Control on
page 9 41.
9-33