Using The Navigation; System - Cadillac Escalade 2013 Owner's Manual

7-62 Infotainment System
Navigation

Using the Navigation

System

This section presents basic
information needed to operate the
navigation system.
Use the buttons located on the
navigation system along with the
available touch-sensitive screen
buttons on the navigation screen to
operate the system. See Overview
on page 7 4 for more information.
Once the vehicle is moving, various
functions are disabled to reduce
driver distractions.
Navigation Control Buttons
The following control buttons are
located on the navigation system:
O
/ (Power/Volume):
1. Press to turn the system on
and off.
2. Turn to increase or decrease the
volume to the audio system.
3. Press and hold for more than
two seconds to turn off the
navigation system, the Rear
Seat Entertainment (RSE), and
Rear Seat Audio (RSA). If the
vehicle has not been tuned off,
the RSE and the RSA can be
turned back on by pressing this
knob and continues play of the
last active source.
Z
(Eject): Press to eject the CD/
DVD Disc. See CD/DVD Player on
page 7 18.
(Tuning Knob): Turn to go to
the next or previous frequency or
disc track or chapter. See CD/DVD
Player on page 7 18 or MP3 on
page 7 27 for more information.
AUDIO: Press to display the audio
screen. Press to switch between
AM, FM, or XM, if equipped, DISC,
or AUX (Auxiliary), or press on the
screen button. See CD/DVD Player
on page 7 18, MP3 on page 7 27,
and Auxiliary Devices on page 7 30
for more information.
FAV (Favorite): Press to access
the preset stations. See Storing
Radio Station Presets under,
Overview on page 7 4.
5
(Phone): See OnStar Overview
on page 14 1 (if equipped) and
Bluetooth on page 7 103 (if
equipped) for more information.
e
(Sound): Press to access the
Sound menu to adjust the treble,
midrange, bass, fade, balance, and
Digital Signal Processing (DSP).
y z
/ (Scan Up/Down): Press to
scan the tracks/chapters up or down
on a disc.
y © ¨ z
/ or / (Seek/Scan)
(Previous/Next): Press the up or
down arrows to go to the next or
previous station. Press and hold
either arrow for more than
two seconds. The radio goes to a
station, plays for a few seconds,
then goes to the next station.