TCP port No.
When "TCP" is selected in the mode, input the port
number corresponding to TCP port. Use other than
Well-Known port numbers (0 to 1023).
Baud rate
Select a baud rate which corresponds to the peripheral
device of serial interface. Selectable baud rates are
shown below.
38400, 19200, 9600, 4800, 2400, 1200, 600, 300 (bps)
Parity bit
Select a parity which corresponds to the peripheral
device of serial interface from among None, Odd or
Even.
Character length
Select the character length which corresponds to the
peripheral device of serial interface from 7 or 8 (bits).
Stop bits
Select the stop bit which corresponds to the peripheral
device of serial interface from 1 or 2 (bits).
OK/Cancel
See "Buttons common to every setting menu" on page
31.
68
Transmitting with External Equipment Using the External Serial Terminal — Serial setting Menu