Controlling the camera
on a panorama image
When you have the authorization to control the camera,
the panorama window is displayed under the monitor
window.
In the panorama window, a 360° view around the camera
is displayed as a panorama image. When you click on
the displayed panorama image, the camera faces the
clicked area.
Monitor window
panorama window
To create the panorama image
Create the panorama image with the supplied "SNC
panorama creator". Refer to page 81 for details.
Tip
The panorama image is the still image converted from
the image taken when you were going to create a
panorama image with "SNC panorama creator". When
the camera is moved or when the layout around the
camera is changed, create the panorama image again.
Facing the camera toward the
specified point
1
Create a panorama image with "SNC panorama
creator" and display it.
2
Click the point you want to watch in the panorama
window.
26
Controlling the camera on a panorama image
Click the point you
want to watch in
SNC-RZ25N/P
the panorama
window.
To turn off the panorama window
When you are not going to use the panorama image,
click
the panorama window.
The camera is moved to face toward the clicked
point, and the present image at the point is
displayed in the monitor window.
The present situation is
displayed in the monitor
window at the clicked point.
under the panorama window to turn off