Mitsubishi Electric PLA-A EA Series Operation Manual page 6

2. Parts Names
■ Wireless Remote-Controller
Note:
In this operation manual, the term "Wireless remote controller" refers only to the PAR-SL101A-E. If you need any information for other
remote controllers, refer to the operation manual that is included with the grille, which includes a remote controller, or the operation
manual that is included with the optional remote controller.
Set Temperature buttons
Mode button (Changes operation mode)
Airflow button (Changes up/down airflow direction)
Weekly timer ON/OFF button
Set Time button (Sets the time)
Operation mode
Cool
Fan
Heat
Temperature setting
The units of temperature can be changed. For
details, refer to the Installation Manual.
en
Vane setting
Step 1 Step 2 Step 3 Step 4 Step 5 Swing
5
Timer ON button
Timer OFF button
Dry
Auto
Auto
Transmission area
Not available
Remote controller display
Battery replacement indicator
OFF/ON button
Fan Speed button (Changes fan speed)
i-see button
Menu button
SET/SEND button
CANCEL button
Up/Down buttons
Reset button
Not available
Appears when a non-supported func-
tion is selected.
Battery replacement indicator
Appears when the remaining battery
power is low.
Fan speed setting
Auto
3D i-see Sensor (Air distribution)
Default Direct Indirect When Direct or Indirect
is selected, the vane
setting is set to "Auto".