The page includes the following fields:
Object
•
GVRP Status
• Join Timeout
• Leave Timeout
• LeaveAll Timeout
4.3.3.11 GVRP Port Setting
The GVRP Port Setting/Status screens in
The page includes the following fields:
Object
•
Port Select
• GVRP Enabled
• Registration Mode
Figure 4-3-46: GVRP Global Setting Page Screenshot
Description
Display the current GVRP status.
Display the current join timeout parameter.
Display the current leave timeout parameter.
Display the current leaveall timeout parameter.
Figure 4-3-47
&
Figure 4-3-48
Figure 4-3-47: GVRP Global Setting Page Screenshot
Description
Select port for this drop down list to assign protocol VLAN port.
Controls whether GVRP is enabled or disabled on port.
By default GVRP ports are in normal registration mode. These ports use GVRP
join messages from neighboring switches to prune the VLANs running across the
802.1Q trunk link. If the device on the other side is not capable of sending GVRP
161
User's Manual of GS-4210 Series
appear.