Harman Kardon AVR 370 Service Manual page 5

125 watt 7.1 channel a/v receiver
Hide thumbs Also See for AVR 370:
Table of Contents

Advertisement

SPECIFICATIONS
AVR 370
What's included:
1 AVR 370 A/V receiver
Backlit main remote control
with batteries
Zone II remote with batteries
Microphone for EzSet/EQ room-
correction system
Audio Section
Stereo mode continuous average power: 125 watts/ch, 20Hz – 20kHz,
<0.07% THD, both channels driven @ 8 ohms, 6-ohm certified
Multichannel power: 125 watts/ch, 20Hz – 20kHz, <0.07% THD,
two channels driven @ 8 ohms, 6-ohm certified
Bandwidth @ 1W (+0dB/–3dB): 10Hz – 130kHz
Input sensitivity/impedance (line-in): 200mV/47k ohms
Signal-to-noise ratio (IHF-A): 100dB
Adjacent channel separation
Dolby Pro Logic
I/II: 40dB
®
Dolby Digital: 55dB
DTS: 55dB
High instantaneous current capability (HCC): ±45 amps
Transient intermodulation distortion (TIM): Unmeasurable
Slew rate: 40V/μsec
FM Tuner Section
Frequency range: 87.5MHz – 108.0MHz
Usable sensitivity (IHF): 1.3μV/13.2dBf
Signal-to-noise ratio (mono/stereo): 70dB/68dB
Distortion (mono/stereo): 0.2%/0.3%
Stereo separation: 40dB @ 1kHz
Selectivity (±400kHz): 70dB
Image rejection: 80dB
IF rejection: 90dB
125 watts per channel
Eight HDMI inputs with 3D and Audio Return Channel
including one on the front panel, and two HDMI outputs
7.2-channel surround sound
Dolby TrueHD and DTS-HD Master Audio decoding
Multizone functionality
Built-in Wi-Fi and AirPlay audio streaming
DLNA Certified
1.5 connectivity
®
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.harmankardon.com
© 2012 HARMAN International Industries, Incorporated. All rights reserved.
Harman Kardon and Logic 7 are trademarks of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. The "beautiful/sound" logo, EzSet/EQ and the EzSet/EQ logo are trademarks of HARMAN International Industries, Incorporated. AirPlay, the AirPlay logo, Apple, the Apple App Store logo, iPad,
iPhone, iPod and the "Made for iPod, iPhone and iPad" logo are trademarks of Apple Inc., registered in the U.S. and other countries. "Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Android and the "Google play" logo are trademarks of Google Inc. Use of
this trademark is subject to Google Permissions. DLNA Certified and the "DLNA Certified" logo are registered trademarks of the Digital Living Network Alliance. Dolby, the Dolby logos and Pro Logic are registered trademarks of Dolby Laboratories. DTS is a registered trademark of DTS, Inc. DTS-HD Master Audio and the "DTS-HD Master
Audio" logo are trademarks of DTS, Inc. HDMI and the "HDMI" logo are registered trademarks of HDMI Licensing, LLC in the United States and/or other countries. The USB logo is a trademark of the USB Implementers Forum, Inc. The "vTuner" logo is a trademark of Nothing Else Matters Software, Ltd. Wi-Fi and the Wi-Fi CERTIFIED logo are
registered trademarks of the Wi-Fi Alliance. Features, specifications and appearance are subject to change without notice.
1 Detachable IEC power cord
1 Quick Start Guide
1 AM loop antenna
1 FM antenna
AM Tuner Section
Frequency range: 520kHz – 1,620kHz
Signal-to-noise ratio: 45dB
Usable sensitivity (loop): 500μV
Distortion (1kHz): 50%, mod 0.8%
Selectivity (±10kHz): 30dB
Video Section
Television format: PAL, NTSC
Input level/impedance: 1Vp-p/75 ohms
Output level/impedance: 1Vp-p/75 ohms
Video frequency response (composite video): 10Hz – 8MHz (–3dB)
HDMI: 3D, Audio Return Channel, CEC and Deep Colour
General
Power requirement: AC 230V/50 – 60Hz
Power consumption: 120W idle; 1,405W maximum (7 channels driven)
Dimensions (W x H x D): 440mm x 165mm x 382mm
(17-5/16" x 6-1/2" x 15")
Weight: 8kg (17.6 lb)
High-definition user interface
4K video pass-through and scaling
Full preamp outputs for use with external power amplifiers
Complete Zone 2 audio system with remote control
EzSet/EQ
Free downloadable control applications for smartphones
and tablets with iOS software and Android application
technology maximizes sonic performance

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr 270

Table of Contents