Table of Contents
Advertisement
APPENDIx 2: OPTIONAL THERMODISC INSTALLATION
A thermodisc, sold separately, can be installed on the wood fire. Thermodisc allows the blower
to operate only when the wood fire is hot enough. See the instructions provided with the
thermodisc for more details.
Screw the thermodisc (B) with the screws (C) supplied with the thermodisc on the back of the wood fire.
Ensure that the blower's power cord is not in contact with any surface of the wood
fire to prevent electrical shock or fire damage. Do not run the power cord beneath the
wood fire.
Installation and Operation Manual - Escape 1800
Page 39
Advertisement
Table of Contents
