Brother SP-1 Online User's Manual page 134

Select one of the following verification methods from the Server Certificate Verification drop-down list:
Option
No Verification
CA Cert.
CA Cert. + ServerID
7. When finished with configuration, click Submit.
For wired networks: After configuring, connect your machine to the IEEE 802.1x supported network. After a few
minutes, print the Network Configuration Report to check the <Wired IEEE 802.1x> status.
Option
Success
Failed
Off
Related Information Related Information
• Use IEEE 802.1x Authentication for a Wired or a Wireless Network
Related Topics:
• Print the Network Configuration Report
• Print the WLAN Report
• Access Web Based Management
• Configure Certificates for Device Security
• Supported Security Certificate Features
1 The common name verification compares the common name of the server certificate to the character string configured for the Server ID.
Before you use this method, contact your system administrator about the server certificate's common name and then configure Server ID.
Description
The server certificate can always be trusted. The verification is not
performed.
The verification method to check the CA reliability of the server
certificate, using the CA certificate issued by the CA that signed the
server certificate.
The verification method to check the common name
certificate, in addition to the CA reliability of the server certificate.
Description
The wired IEEE 802.1x function is enabled and the authentication was
successful.
The wired IEEE 802.1x function is enabled; however, the authentication
failed.
The wired IEEE 802.1x function is not available.
1
value of the server
130