Other Information For This Machine; Legal Prohibition; Laser Safety - Ricoh HD-MB50D Manual

4. Other Information for This Machine

Legal Prohibition

Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local
law:bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks,
passports, driver's licenses.The preceding list is meant as a guide only and is
not inclusive. We assume no responsibility for its completeness or accuracy. If
you have any questions concerning the legality of copying or printing certain
items, consult with your legal advisor.

Laser Safety

CDRH Regulations
This equipment complies with requirements of 21 CFR Subchapter J for
class I laser product. This equipment contains two AlGaInP laser diodes, 660
nanometer wavelength for each emitter. The beam divergence angle is 15
degrees (minimum) and 25 degrees (maximum) in the vertical direction, and
7 degrees (minimum) and 13 degrees (maximum) in the horizontal direction,
and laser beams are generated in Continuous Wave (CW) mode. The maximum
output power of the light source is 15 milliwatt.
Caution
Use of controls or adjustments or performance of procedures other than those
specified in this manual might result in hazardous radiation exposure.
Notes to Users in the United States of America
FCC Rules
Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
15