Other Information For This Machine; Laws And Regulations; Legal Requirements - Ricoh P 800 Operating Instructions Manual

3. Other Information for This Machine

Laws and Regulations

Duplication and Printing Prohibited
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports,
driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility
for its completeness or accuracy. If you have any questions concerning the legality of copying
or printing certain items, consult with your legal advisor.

Legal Requirements

Laser Safety
This machine complies with the requirements of IEC60825-1:2014 for class 1 laser product.
The machine contains two monolithic array laser diodes, 655–663 nanometer wavelength
for each emitter. The beam divergence angle is 21 degrees (minimum) and 29 degrees
(maximum) in the vertical direction, and 7 degrees (minimum) and 11 degrees (maximum)
in the horizontal direction, and laser beams are generated in Continuous Wave (CW) mode.
The maximum output power of the light source is 25 milliwatt.
The following label is attached on the rear side of the machine:
Caution
Use of controls or adjustments or performance of procedures other than those specified in
this manual might result in hazardous radiation exposure.
EMC Directive
Installing the Ferrite Core
An Ethernet interface cable connected to the Device Server Option port with a ferrite core
must be used for RF interference suppression.
User Information on Electrical and Electronic Equipment (For Users in India)
This product including components, consumables, parts and spares complies with the "India
E-waste Rule" and prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and
0.01 weight % for cadmium, except for the exemptions set in the Rule.
10