Table of Contents
Advertisement
Securely anchor machine to the floor
Cybex strongly recommends to maximize stability, equipment must be secured to a solid level
surface.
WARNING: Anchoring equipment:
Cybex is not responsible for the actual anchoring of equipment. Consult with a
•
professional contractor.
Use fasteners having a minimum of 500 lbs. tensile capacity (3/8'' grade 2 bolts or
•
better).
If legs/frame does not contact surface, DO NOT pull down with anchors. Shim
•
any leg or frame not in contact with surface using flat washers.
Install weight plates
1. Install individual weight plates one at time.
2. Position each weight plate so wide edges of bushings face upward and narrow edges of
bushings face downward.
Wide bushing
edge faces upward
3. Install lifting post.
4. Place springs and guide rod caps on guide rods.
5. Compress guide rod caps and align guide rod caps with weight frame holes and secure in
place.
6. Guide rod caps must snap or lock into weight frame holes.
Cybex Owner's Manual
The narrow bushing edge
must face downward.
11
Advertisement
Table of Contents
