Adjusting Buttonhole Stitch Density - Janome HD523 Instruction Manual

v
b
n
v Set the pattern selector dial at "
Sew up the right side of the buttonhole.
Stop the machine when you are directly
opposite the fine stitch on the left-hand side
and raise the needle.
b Set the pattern selector dial at "
Sew a few bartacks and raise the needle from
the fabric.
Set the stitch length dial to "0". and the pattern
selector dial at straight stitch sewing.
Sew a few locking stitches.
n Remove the fabric from the machine and cut
the sewing threads.
Insert a pin inside the bartack.
Then cut the opening with a seam ripper.
Take care not to cut the stitches.

Adjusting buttonhole stitch density

Turn the stitch length dial to the left for a coarser
density.
Turn the stitch length dial to the right for a tighter
density.
21
".
".