Adjusting The Stitch Width And Density For Buttonholes; Round-End Buttonhole; Fine Fabric Buttonhole - Janome 4120QDC Instruction Manual

Janome 4120QDC Sewing Machine Instruction Manual
w e
q
q w e
www.janomeflyer.com
Adjusting the Stitch Width and Density for
Buttonholes
• Adjusting the stitch width
q
w
• Adjusting the stitch density
q
w

Round-End Buttonhole

q Stitch pattern:
w Thread tension dial: 1 to 5
e Presser foot:
The sewing procedure is the same as the square
buttonhole. The stitch width can be varied from 2.5 to 5.5.
To change the stitch width or stitch density, refer to the
section above.

Fine Fabric Buttonhole

q Stitch pattern:
w Thread tension dial: 1 to 5
e Presser foot:
The sewing procedure is the same as the square
buttonhole. The stitch width can be varied from 2.5 to 5.5.
To change the stitch width or density, refer to the section
above.
37
Press the stitch width adjustment key
change the stitch.
Press the "–" button to decrease buttonhole width q.
Press the "+" button to increase buttonhole width w.
The stitch width can be varied from 2.5 to 7.0
depending on the selected buttonhole.
The default setting is "5.0".
Press the stitch length adjustment key
change the stitch density.
Press the "–" button to make the buttonhole stitch
denser q.
Press the "+" button to make the buttonhole stitch less
dense w.
The stitch density can be varied from 0.3 to 0.8
depending on the selected buttonhole.
The default setting is "0.4".
MODE 2:
Automatic buttonhole foot R
MODE 2:
Automatic buttonhole foot R
4120QDC Owners Manual/ User Guide
to
to
22
23