Pro-Form PFEL55921-INT.1 User Manual page 8

5. Tip: Avoid pinching the Upper Wire (110).
Have a second person hold the Upright (4) on
the Frame (1).
Tip: Two M10 x 25mm Screws (92) are
preattached to the Frame (1).
Attach the Upright (4) to the Frame (1) with two
additional M10 x 25mm Screws (92); start both
Screws, and then tighten all four Screws.
6. Locate the wire tie (A) in the lower end of
the Upright (4). Tie the wire tie to the Upper
Wire (110). Then, pull the upper end of the wire
tie until the Upper Wire is routed through the
Upright.
Tip: To prevent the Upper Wire (110) from
falling into the Upright (4), secure the Upper
Wire with the wire tie (A).
5
110
6
A
A
110
8
Avoid pinching the
Upper Wire (110)
92
4
92
1
4