Table of Contents
Advertisement
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and
in dotted quad form.
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each three-
digit number separated by dots should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are 6 two-
digit hexadecimal numbers
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 172.31.0.1).
VLAN
This item displays the virtual LAN settings. The options are Disable and Enable.
Configure IPv6 Support
This section displays configuration features for IPv6 support.
IPv6 address status
IPv6 Support
Use this feature to enable IPv6 support. The options are Enabled and Disabled.
*If the item "IPv6 Support" above is set to Enabled, the item Configuration Address
Source will become available.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The options are Static and DHCP.
*If the item "Configuration Address Source" above is set to Static, the following items
will become available for configuration:
•
Station IPv6 Address
•
Prefix Length
•
IPv6 Router1 IP Address
80
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
