Supermicro H13SVW-N User Manual page 70

to Always Enable, legacy console redirection remains enabled when booting the OS. The
options are Always Enable and BootLoader.
Legacy Console Redirection Settings
Legacy Serial Redirection Port
For this setting, select a COM port to display redirection of Legacy OS and Legacy OPROM
messages. The options include COM1 and SOL.
Serial Port for Out-of-Band Management /
Windows Emergency Management Services (EMS)
Console Redirection
Select Enabled to enable EMS console redirection support for a serial port specified by the
user. The options are Disabled and Enabled.
*If the item above set to Enabled, the following items will become available for user's
configuration:
Console Redirection Settings
Out-of-Band Mgmt Port
The feature selects a serial port in a client server to be used by the Microsoft Windows
Emergency Management Services (EMS) to communicate with a remote host server. The
options are COM1, and SOL.
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirection.
Select VT100 to use the ASCII character set. Select VT100+ to add color and function
key support. Select ANSI to use the extended ASCII character set. Select VT-UTF8 to use
UTF8 encoding to map Unicode characters into one or more bytes. The options are VT100,
VT100+, VT-UTF8, and ANSI.
Bits per Second
This item sets the transmission speed for a serial port used in Console Redirection. Make
sure that the same speed is used in the host computer and the client computer. A lower
transmission speed may be required for long and busy lines. The options are 9600, 19200,
57600, and 115200 (bits per second).
Flow Control
Use this item to set the flow control for Console Redirection to prevent data loss caused
by buffer overflow. Send a "Stop" signal to stop sending data when the receiving buffer
is full. Send a "Start" signal to start sending data when the receiving buffer is empty. The
options are None, Hardware RTS/CTS, and Software Xon/Xoff.
70
Chapter 4: UEFI BIOS