Table of Contents
Advertisement
f
Touch
to exit the setup.
The name beside [Machine name] is the name that
will be used when registering the machine with
embroidery editing software (PE-DESIGN version 11
or later) or Design Database Transfer in order to
transfer files.
Memo
• While connected, the signal strength is indicated
by the icon in the upper-left corner of the display.
• Once a wireless network connection has been set
up, a connection will be established each time the
machine is turned on. However, [Wireless LAN
Enable] in the network settings screen must remain
set to [ON].
• The name in the [Machine name] field will be used
with the Artspira App (limited to certain sales
region), My Stitch Monitor App and My Design
Snap App.
Using the [Others] Menu to Set Up the
Wireless Network Connection
The [Others] menu contains the following items.
1
2
3
1 TCP/IP settings can be manually entered.
2 Shows the MAC address.
3 Use when proxy settings are required.
CONNECTING THE ACCESSORY TO THE MACHINE
CONNECTING THE ACCESSORY TO
THE MACHINE
Using a USB Mouse
A USB mouse, connected to the machine, can be used to
perform a variety of operations in the screens.
Connect a USB mouse to the USB port.
Memo
• Use a basic computer mouse to operate the
machine functions. Some USB mouse devices may
not be compatible with this machine.
a
Note
• The left mouse button can be used to perform
operations such as choosing a design and
choosing menu keys.
• The mouse pointer does not appear in the screen
saver or opening screen.
Clicking a Key
When the mouse is connected, the pointer appears on the
screen. Move the mouse to position the pointer over the
desired key, and then click the left mouse button.
Memo
• Double-clicking has no effect.
1 Pointer
1 USB port
2 USB mouse
1
1
21
Advertisement
Table of Contents
