Embroidering Couching Patterns - Brother 882-W83 Operation Manual

EMBROIDERY APPLICATIONS
c
Remove the embroidery frame from the embroidery
unit, and cut around the outside of the stitches of the
fabric for the appliqué piece. And then, reattach the
embroidery frame to the embroidery unit.
Note
• Do not remove the fabric from the embroidery
frame to cut it. Also, do not pull or push on the
fabric. Otherwise, the fabric may loosen in the
frame.
d
Select the satin stitch frame pattern of the same shape
as the appliqué and embroider the satin stitch pattern
to create an appliqué.
84

Embroidering Couching Patterns

Couching patterns can be embroidered using yarn.
CAUTION
• When using yarn, we recommend selecting
yarn of weight 4 (MEDIUM
yarn is often referred to as worsted weight, 20
knitted stitches per 10 cm, or 9-11 wraps per
inch. The diameter of the yarn is
approximately 2-3 mm (approx. 1/12-1/8
inch). If the yarn is extremely thin or thick, has
an unusual shape (flat or furry), or more than 2
yarns, the best finishing results may not be
achieved, or injuries or damage may result.
Note
• If the spool stand in the procedure is not included
with your machine, purchase the optional spool
stand from your Brother authorized dealer or our
web site https://s.brother/coeka/.
• Before embroidering your project, do trial
embroidery on a scrap piece of fabric that is the
same as that used in your project.
 Preparing for Embroidery Couching
a
Turn off the machine.
Attach the embroidery unit.
b
Install a bobbin wound with embroidery bobbin
thread.
c
Turn on the machine.
d
Touch , and then touch
). Medium
.