Nameplate / Warning Decal Maintenance; Welder / Generator Maintenance; Engine Maintenance Components - Lincoln Electric DUAL VANTAGE 700 (AU) Operator's Manual

DUAL VANTAGE ® 700 (AU)
ITEM
Air Cleaner Element
(Engine)
Oil Filter
Fan Belt
Fuel Strainer
Fuel Filter /
Water Separator
Battery
Engine Oil Change
NAMEPLATES / WARNING DECALS
MAINTENANCE
Whenever routine maintenance is performed on this
machine - or at least yearly - inspect all nameplates
and labels for legibility. Replace those which are no
longer clear. Refer to the parts list for the replacement
item number.
WELDER / GENERATOR
MAINTENANCE
STORAGE
Store the DUAL VANTAGE
protected areas.
CLEANING
Blow out the generator and controls periodically with
low pressure air. Do this at least once a week in par-
ticularly dirty areas.
BRUSH REMOVAL AND REPLACEMENT
It is normal for the brushes and slip rings to wear and
darken slightly. Inspect the brushes when a generator
overhaul is necessary.
Do not attempt to polish slip rings while the
engine is running.
------------------------------------------------------------------------
Table D.1 Engine Maintenance Components
MAKE PART NUMBER
Donaldson P822768
Cummins C6002112110
Fleetguard LF16011
Cummins C0412021749
Cummins 3826094
Fleetguard FF5079
Fleetguard FS19594
----- BCI GROUP 34
See Manual -----
700 (AU) in clean, dry,
®
WARNING
SERVICE INTERVAL
(With Service Indicator) Clean as Needed,
Replace as indicated by Service Indicator.
Replace every 250 hours or 3 months,
whichever is less.
Inspect every 1000 hours or 12 months,
whichever is less.
Inspect and Replace monthly as required.
Replace every 500 hours or 6 months,
Inspect every 500 hours
Change every 250 hours or 3 months,
whichever is less. Check daily.
D-5
MAINTENANCE
Replace annually.
whichever is less.