11 SERVICE WORK ON THE CHASSIS
56
(SX‑F EU/US, XC-F US)
–
Position the upper triple clamp with the handlebar.
–
Mount screw
F01562-10
–
Position the fork legs.
Air bleeder screw
to the front.
Valve
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the upper edge of the upper
H01182-11
triple clamp.
The air suspension is located in the left fork leg.
The pressure and rebound damping is located in
the right fork leg.
–
Tighten screws
Guideline
Screw, bottom
triple clamp
F01572-10
–
Tighten screw
Guideline
Screw, top steering
head
F01563-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
F01563-11
4
, but do not tighten yet.
5
of the right fork leg is positioned
A
of the left fork leg faces the front.
6
.
M8
4
.
M20x1.5
7
.
M8
20 Nm (14.8 lbf ft)
12 Nm (8.9 lbf ft)
12 Nm (8.9 lbf ft)
Loctite
®
243™