Samsung WD10J6 Series User Manual page 55

Problem
1C
AC
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
WD10J6410AX_DC68-03591Q-02_EN.indd 55
The Water Level sensor is not working properly.
• Try power off and restarting the cycle.
• Check Water Level Sensor wire harness.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the "1C" code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
Action
English 55
2016/4/14 13:41:26