Table of Contents
Advertisement
Installation
WARNING
Stop using the washing machine if there is a water leak, and contact a local Samsung service
centre. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water supply hose by force. If the hose is too short, replace the hose with
a longer, high-pressure hose.
22 English
WD10J6410AX_DC68-03591Q-02_EN.indd 22
7. If you are using a screw type of water
tap, use the provided screw-type
adaptor to connect to the water tap as
shown.
8. Connect the other end of the water
supply hose to the inlet valve on the
back of the washing machine. Turn the
hose clockwise to tighten.
9. Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat the
steps above.
2016/4/14 13:41:22
Advertisement
Table of Contents
