How To Use; Getting Started; Ass E Mb Li N G The Fo O D P R O Cesso R - Black & Decker FP4150 Instruction Manual

HOW TO U S E
This product is for household
use only.
G E T T I NG STARTE D
• Remove all packing material, any stickers,
and the plastic band around the power
plug.
• Remove and save literature.
• Please visit
www.prodprotect.com/applica
to register your warranty.
• Wash all removable parts as instructed
in CARE AND CLEANING section of this
manual.
CAUTION: Handle blade and disc
carefully. They are very sharp.
• Select a level dry countertop where the
appliance is to be used allowing air space
on all sides to provide proper ventilation
for the motor.
ASS E MB LI N G THE
FO O D P R O CESSO R
Important: Always make sure your food
processor is unplugged and placed on a flat,
level surface before starting to assemble.
Important: For your protection this
appliance has an interlock system. The
processor will not operate unless the cover
is properly locked in place.
1. Place center shaft in workbowl.
2. Place either the chopping blade or the
slicing/shredding disc onto center shaft.
4. Place cover on work bowl with the small
latch to the right of the workbowl's handle.
3. Place workbowl onto base
5. Rotate cover clockwise until cover locks
into place.
6. Insert the food pusher into the feed
chute.
7. Make sure the control dial is turned to
OFF. Plug in the appliance to turn it on. It is
now ready to use.
4