Table of Contents
Advertisement
Adjust the height of the shoulder belt so
the belt rests across the middle of your
shoulder.
E190812
Conditions of operation
The driver seatbelt is not buckled before
the ignition switch is turned to the on posi-
The driver seatbelt is buckled while the
indicator light is illuminated and the
warning chime is sounding...
The driver seatbelt is buckled before the
ignition switch is turned to the on position...
CHILD RESTRAINT AND
SEATBELT MAINTENANCE
Inspect the vehicle seatbelts and child
restraint systems periodically to make sure
they work properly and are not damaged.
Inspect the vehicle seatbelts to make sure
there are no nicks, tears or cuts. Replace if
necessary. All vehicle seatbelt assemblies,
including retractors, buckles, front seatbelt
buckle assemblies, buckle support
assemblies (slide bar-if equipped),
shoulder belt height adjusters (if
E-Series (TE4) Canada/United States of America, enUSA, Edition date: 201707, First Printing
Seatbelts
If
tion...
To adjust the shoulder belt height:
1.
Press the button and slide the height
adjuster up or down.
2. Release the button and pull down on
the height adjuster to make sure it is
locked in place.
SEATBELT WARNING LAMP
AND INDICATOR CHIME
This lamp illuminates and an
audible warning will sound if the
driver seatbelt has not been
E71880
fastened when the vehicle's ignition is
turned on.
The seatbelt warning light illuminates and
the warning chime sounds for a few
seconds.
The seatbelt warning light and warning
chime turn off.
The seatbelt warning light and indicator
chime remain off.
equipped), shoulder belt guide on seatback
(if equipped), rear inflatable seatbelts (if
equipped), child restraint LATCH and
tether anchors, and attaching hardware,
should be inspected after a crash. Read
the child restraint manufacturer's
instructions for additional inspection and
maintenance information specific to the
child restraint.
28
Then
Advertisement
Table of Contents
