Dell S2721QSA User Manual page 9

• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Supports Picture by Picture (PBP) and Picture in Picture (PIP) Select mode.
NOTE: When PIP/PBP is activated, AMD FreeSync™ (in AMD Radeon™
software) is disabled.
• Power and OSD buttons lock.
• Security lock slot.
• < 0.3 W in Standby Mode.
• Optimize eye comfort with a flicker-free screen and low blue light feature.
• S2721QS/S2721QSA: The Monitor uses Low Blue Light panel and is compliant
with TÜV Rheinland (Hardware Solution) at factory reset or default setting.
This built-in low blue light solution reduces hazardous blue light emissions by
adjusting display parameters, without sacrificing true-to-life colors.
WARNING: The possible long-term effects of blue light emission from
the monitor may cause damage to the eyes, including eye fatigue,
digital eye strain, and so on. ComfortView (S2721Q) and ComfortView
Plus (S2721QS/S2721QSA) features are designed to reduce the amount
of blue light emitted from the monitor to optimize eye comfort.
*The 4 ms gray-to-gray mode is achievable in the Extreme mode to reduce visible
motion blur and increased image responsiveness. However, this may introduce
some slight and noticeable visual artifacts into the image. As every system setup
and every user's needs are different, we recommend that users experiment with
the different modes to find the setting that is right for them.
About your monitor
│
9