Precautions For Disassembly/Reassembly; Self-Diagnostic Feature; Disposing Of The Lithium Battery - Canon iPF710 Service Manual

Before disassembling the printer for servicing, discharge any static buildup by touching a grounded metal fitting
or the like.

1.7.3.4 Precautions for Disassembly/Reassembly

The precautions for disassembly/reassembly are described in "Disassembly/Reassembly".

1.7.3.5 Self-diagnostic Feature

The printer has a self-diagnostic feature to analyze hardware problems.
The self-diagnosis result is shown on the display and indicated by lamps.
For detailed information, see "Error Codes".

1.7.3.6 Disposing of the Lithium Battery

The main controller PCB of this printer is equipped with a lithium battery to back up various data.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
"For CA, USA Only
Included battery contains Perchlorate Material-special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for detail."
Chapter 1
0013-5150
0013-5151
0013-5385
1-49