Details Of Service Mode - Canon iPF710 Service Manual

Chapter 7

7.1.3 Details of Service Mode

This section provides details of the Service mode menu.
a) DISPLAY
Displays and prints the printer information.
1) PRINF INF
Prints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on A4-size or lager paper.
When a roll media is used, the layout is optimized according to the media width.
2) SYSTEM
Displays the printer information shown below.
Display
S/N Serial number of printer
TYPE Type setting on main controller PCB
* iPF710/700 is represented by 36.
LF TYPE Feed roller type: 0 or 1
TMP Ambient temperature
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
SIZE CR Detected size of loaded media (carriage scan direction)
SIZE CR Detected size of loaded media (carriage scan direction)
3) HEAD
Displays the following EEPROM information of the printhead.
Display
S/N Serial number of printhead
LOT Lot number of printhead
4) INK
Displays the numbers of days passed since installation of the following ink tanks.
Display
BK Number of days passed since the BK ink tank was installed
7-10
T-7-6
Description
T-7-7
Description
T-7-8
Description
0013-7791
Unit
-
-
-
degrees
C
mm
inch
mm
inch
Unit
Day(s
)