DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
Creating Dynamic IPv4, Static IPv4, or IPoA WAN Connection
On the connection creation page, in the General Settings section, select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 73. The page for creating a new Static IPv4 connection. The General Settings section.
Parameter
Interface
Connection name
Enable connection
General Settings
For the Dynamic IPv4 and Static IPv4 types only.
A physical interface to which the new connection will be assigned.
In order to create an Ethernet WAN connection, select the WAN
value or the value corresponding to the LAN port specified as the
WAN port.
In order to create a VDSL WAN connection, select the value
corresponding to the existing interface or the Add new PTM value
for creating a new interface at the physical layer.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the Add new ATM PVC
value for creating a new interface at the physical layer.
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Page 92 of 372
Configuring via Web-based Interface
Description