Table of Contents
Advertisement
NOTE: If you do not complete each step within 15 seconds, the phone exits setup. Start again at Step 1.
1.
Press MENU until-1- and "SET LDS CODE" appears. 1 flashes.
2.
Press
or
to set the long distance code to 1, 9, or 0.
3.
Press OK or MENU to complete the setting and go to next setting, or press DELETE to complete the setting and
return to standby mode.
SETTING THE AREA CODE
1.
Press MENU button until -000- and "SET AREA CODE" appears. The first 0 flashes.
2.
Press
to increase the digit,
3.
Press OK to move between the different digits.
4.
Press MENU to complete the setting and go to next setting, or press DELETE to complete the setting and return
to standby mode.
NOTE: The default AREA CODE setting is 000.
PHONE RECORD
When you use this telephone with the Caller ID service, you will see the number of the calling party (unless the number
is blocked) before you answer the phone. This telephone will store and display the last 50 missed calls and the last 50
answered calls. When the memory is full, the oldest call information is deleted to make room for new incoming call
information. The telephone also stores and displays information about the last 10 dialed numbers (max 11 digits).
CALLER ID ON CALL WAITING
This feature allows you to see the number of the calling party (unless the number is blocked) if you are on a call and
receive another call. To use this feature, you must subscribe to Caller ID and Call Waiting from the Telephone company.
CALLER ID SUMMARY
The display will show the caller ID summary (MISSED -XX-, ANSWER -XX-) in standby (where XX is the number of missed
and answered calls stored in the memory).
CALL REVIEW
To review call information, you can press MODE. This allows you to review MISSED CALLS, ANSWERED CALLS, or
DIALED NUMBERS. During review, you can use function keys to call, store or delete the phone number.
MISSED CALL
1.
Press MODE, until the display shows MISSED CALL -XX-.
2.
Use
or
to view the missed calls. The new call LED will flash if there are new missed calls.
A M
6:40
03/05
-05-
M I S S E D C A L L
When all missed calls have been reviewed, the new call LED will stop flashing.
ANSWERED CALL
1.
Press MODE, until the display shows ANSWERED CALL -XX-.
2.
Use
or
to view the answered calls.
A M
6:40
03/05
-06-
A N S W E R E D C A L L
DIALED NUMBER
10 dialed numbers can be stored into the redial memory. When the redial memory is full, the oldest dialed information is
deleted to make room for new dialed information.
1.
Press MODE until the display shows DIALED NUMBER -XX-.
2.
Use
or
to view the dialed calls.
to decrease the digit, or use the keypad buttons to set the code manually.
A M
6:40
555-1212
JOHN SMITH
A M
6:40
555-1212
JOHN SMITH
10
03/05
01
03/05
01
Advertisement
Table of Contents
