Dyna-Glo DGX440SGN Instruction Manual page 26

Care and Maintenance
If these instructions are not followed, a fire or explosion may result, possibly causing serious
bodily injury or death.
Cleaning the Griddle Burner Assembly
– Make sure the grill and griddle are cool.
1. Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.
2. Ensure burner is free of any damage. If damage is found, replace with new burner.
3. Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris.
Re-installing the Griddle Burner Assembly
Ensure that gas valve orifices are correctly positioned inside burner inlet (venturi).
The use of a flashlight may be necessary to ensure the correct position.
Insert griddle burner as shown in Figure 4.
Secure griddle burner with 2 hinge pins and reattach the ignition wire to electrode (Figure 5).
Other Care and Maintenance
It is recommended that inspection and service on this appliance be conducted annually by a qualified
service person.
It is recommended that you always check that the outdoor cooking appliance area is clear and free from
combustible material, gasoline and other flammable vapors and liquids before lighting.
It is recommended that you regularly check that the flow of combustion and ventilation air is not
obstructed.
It is recommended that you regularly check that the ventilation openings of the grill cabinet are free and
clear from debris.
It is recommended that you regularly check and clean the burner/venturi tubes for insects and insect
nests. A clogged tube can lead to a fire beneath the grill.
Figure 4
WARNING
26
Figure 5