Grandstream Networks GWN76 Series User Manual page 80

Allow Legacy Devices
Check to support 802.11b devices to connect the AP in 802.11n/g mode. (2.4GHz setting).
(802.11b)
Enable Minimum Configures whether to enable/disable Minimum RSSI function. This option can be either Disabled or Enabled
RSSI and set manually or set to Use Radio Settings.
Specify whether to limit the minimum access rate for clients. This function may guarantee the connection
Minimum Access Rate
quality between clients and AP. This option can be either Disabled or Enabled and set manually or set to Use
Limit
Radio Settings.
Some old devices do not support Wi-Fi6 well and may not be able to scan the signal or connect poorly. After
Wi-Fi5 Compatible
turning on this switch, it will switch to Wi-Fi5 mode to solve the compatibility problem. At the same time, it
Mode
will turn off Wi-Fi6 related functions.
SECURITY
Rogue AP
The GWN Access Points offer the ability to prevent malicious intrusion to the network and increases the wireless security
access of clients when introducing Rogue AP detection. The detected APs will be listed with all the details under Detected
section for further intervention. This feature is not supported in GWN7610.
In the figure below is the configuration page in order to enable the Rogue AP detection and we can set the trusted Aps on the
network.
Field Description
Enable Rogue AP
Select to either to enable or disable Rogue AP scan.
Detection
Radio – Global configuration
Rogue AP-Configuration